KNAUF · MATERIALS
Knauf Rotband
Hand gypsum plaster for interior walls, ceilings and repair areas.
Application and technical data ↗Skim coating for walls and ceilings
Base and finish skim coats to suit the substrate, plasterboard finishing and sanding before painting.
Call us: 0888 39 49 49
THE BASIS FOR A GOOD RESULT
About the service
Skim coating prepares walls and ceilings for the final finish. It corrects the irregularities suited to this stage and creates a surface appropriate for the selected paint and lighting. Work starts with an assessment of the substrate, as each room may need a different approach.
Preparation includes cleaning and removal of unstable areas, as well as appropriate priming according to the system. If necessary, coarse putty is used for leveling, followed by fine processing. The number of layers and specific materials depend on the condition and the desired result.
Problem areas and transitions between materials may require reinforcement where applicable. The causes of the cracks must be accounted for; reinforcement is not a universal guarantee against their recurrence. In the case of plasterboard, joints, corners and attachment points are processed according to the chosen system.
After the required drying time, the surface is sanded and dust is removed. Details and readiness for painting are checked. Skim coating is suitable for new construction and for renovation or redecoration where existing walls and ceilings need preparation.
Materials and preparation
We check the old coating, bumps, joints and problem areas. The base is cleaned and prepared according to the selected material.
We specify the necessary leveling, finishing treatment and the type of future paint. Lighting and wall condition affect the range.
Why careful preparation matters
Skim coating does not resolve the cause of active damp or movement in the substrate. These issues need to be assessed before finishing, rather than covered with more material. The correct sequence of coats, dust removal and inspection under suitable lighting help reveal unevenness before painting. Between operations, the material must be ready for the next stage in accordance with its technical instructions and the room conditions.
FROM PREPARATION TO COMPLETION
How the work proceeds
We inspect the base, irregularities, joints and existing coatings.
We prepare and prime according to the system; we specify the necessary reinforcement.
We apply the leveling and fine layers according to the need of the surface.
We sand, dust and check readiness for paint.
APPLICATIONS
Suitable for your project
- Walls and ceilings
- Plasterboard
- New construction
- Repair and refresh
Enquiries about projects in different parts of Bulgaria are discussed individually according to scope, location and schedule.
BEFORE WE BEGIN
Frequently asked questions
Are coarse and fine putty always necessary?
No. The range depends on the substrate and the smoothness required. A well-prepared surface may require only fine finishing, and larger irregularities require different preparation.
Is sanding part of the paint prep?
Yes, when the system in use requires it. After sanding, it is important that the surface is dust-free and prepared for the next coating.
Can it be machine painted after the putty?
Yes, on a suitable ready base. Machine or manual application is chosen according to the areas, furnishings and details in the room.
MATERIALS FOR THIS STAGE
An informed choice
Sample products and manufacturer's instructions. The specific system is specified for the project.
RELATED SERVICES
Continue to the next stage
Preparation and final coating are planned together according to the condition of the surfaces.
Spray painting
Machine application of paint on walls and ceilings - suitable for vacant rooms and larger areas.
Learn more
Brush and roller painting
Wall and ceiling painting with a roller and brush, for homes, offices, individual rooms and redecoration.
Learn moreImages illustrating plastering, skim coating and painting are conceptual visualisations. The plasterboard photos are real.
FOR YOUR PROJECT
Let’s discuss the next stage.
Enquiries about projects in different parts of Bulgaria are discussed individually according to scope, location and schedule.
Have the location, approximate area, current condition and preferred timing ready.