Where it is used
Used for processing joints according to the type of edging and system. Do not assume that every joint can be completed without reinforcing tape.
Uniflott and finished Uniflott Finish have different roles. The finishing material does not negate the correct initial filling of the joint.
System and application
Joint treatment and overall skim coating are different steps in the surface finishing system.
Knauf jointing and finishing compounds ↗Application method
- Check fastening, edge condition and system detail.
- Prepare the mixture according to the technical data sheet, with clean dishes and tools.
- Fill the joints and process the next layers according to the system.
This is a brief guide. When performing, follow the data sheet, safety instructions and the specific system.
Limitations and application notes
The finishing layer does not replace the main filling of the joints. The consumption per linear meter of joint and the consumption per square meter of putty are not interchangeable.
Frequently asked questions
Can this material be replaced with another from the same group?
Replacement is assessed according to the basis, purpose and system. The exact data sheets are compared, not just the band name.
Is the specified consumption sufficient for an order?
The norm is a starting point under the specified conditions. For the project, the actual area or length, layers, cut and losses are specified; for wet mixtures, a trial application is made.
